C-FIX
For the dimensioning of steel and bonded anchors in concrete as well as injection systems in masonry.
C-FIX
bacset software

C-FIX-Online 

Includes current design standards, e.g. EN 1992-4 and EOTA TR 054 for the dimensioning of steel and bonded anchors in concrete as well as injection systems for anchoring in masonry. The anchor design in concrete can be performed either assuming a rigid base plate following a linear strain distribution or considering realistic stiffness conditions using a spring modeling approach.

Go to C-FIX online

bacset software

Advantages C-FIX Online:

  • The calculation of the anchor forces is performed in the software.
  • The stiffness of the base plate can be verified
  • Easy optimizing of the anchorages is possible
  • Multiple load cases can be defined and designed
  • The profile and the stiffeners are also considered for the calculation
  • The realistic deformations and stresses are shown
  • The FEM Design can be used also to check existing anchorages
  • Optionally, it is possible to perform the base plate design by checking the steel stress in all parts of the connection, as well as the welds, hole bearing resistance and concrete compression below the base plate
 

 

bacset software

Bacset Software ✮

Keep a copy of BACset (usually found on the Schneider Electric Exchange or an old Continuum install CD) on a USB drive. When a trunk goes down and the software server is offline, that command-line utility might be the only thing standing between you and a building full of angry tenants. Have you used BACset recently? What is your go-to trick for getting it to connect to a stubborn bCX? Let me know in the comments.

It speaks directly to the controller's Application Layer, bypassing many of the software layers that can mask errors. You should reach for BACset in three specific scenarios: bacset software

You have a standalone controller (e.g., an ACX, bCX, or AS-P) but no software workstation is connected. BACset allows you to check the device instance, baud rate, and MAC address to ensure the controller is alive on the MS/TP trunk. Keep a copy of BACset (usually found on

Your time is valuable

The FEM calculation tool provides you with further information to design a sufficiently stiff base plate. It is no longer necessary to switch between the anchor design software C-FIX Online and a finite element software for the base plate calculation and design. This feature is a real time-saver!

Go to C-FIX online

bacset software

C-FIX Offline

In addition to all current design standards C-FIX Offline includes also the verification according to „ENSO“ (Engineering Solution) which allows the calculation of extended design models that are possible according to fib. Furthermore, the module settings can be individually adapted to the local requirements.

To the offline version

bacset software

Advantages C-FIX Offline

  • Design of injection systems in masonry.
  • Design under dynamic actions - threshold or alternating loads.
  • Design under seismic action (earthquake).
  • Measurement under extraordinary stress.
bacset software

Download and System requirements FiXperience-Offline

Downloads

Online Installer (individual position version)

MSI Network-package for administrators (network-version)​

Offline Installation (CD Version)

System requirements

Main memory: Min. 8 GB
Operating systems:  Windows® 10, Windows® 11
Processor: x64-based processor (ARM processors are not supported)
Note: The current system requirements may vary based on your system configuration and your operating system.

cd-blue-75b965665c-62mfm