access-list 1 permit 192.168.1.0 0.0.0.255 ip nat inside source list 1 interface s0/1/0 overload : show ip nat translations Lab 10 – DHCP & DNS Configuration Router as DHCP server :

: OSPF neighbors not forming. Checks : Hello/dead timers, area mismatch, network types, ACL blocking.

ip dns server ip host www.ccnalab.com 192.168.1.100 Topology : WLC – Switch – AP – Laptop (wireless)

ipv6 unicast-routing interface g0/0 ipv6 address 2001:db8:1:1::1/64 ipv6 enable :

interface g0/0.10 encapsulation dot1Q 10 ip address 192.168.10.1 255.255.255.0 interface g0/0.20 encapsulation dot1Q 20 ip address 192.168.20.1 255.255.255.0 : ping from PC in VLAN10 to PC in VLAN20 Lab 5 – Static & Default Routing Topology : R1 — R2 — R3

network 10.1.1.0 0.0.0.3 area 0 network 192.168.2.0 0.0.0.255 area 1 : show ip ospf neighbor | show ip route ospf Lab 7 – IPv6 Addressing & Routing Configure IPv6 on interface :

Lab Guide With Packet Tracer Pdf — Cisco Ccna 200-301 Practical

access-list 1 permit 192.168.1.0 0.0.0.255 ip nat inside source list 1 interface s0/1/0 overload : show ip nat translations Lab 10 – DHCP & DNS Configuration Router as DHCP server :

: OSPF neighbors not forming. Checks : Hello/dead timers, area mismatch, network types, ACL blocking. access-list 1 permit 192

ip dns server ip host www.ccnalab.com 192.168.1.100 Topology : WLC – Switch – AP – Laptop (wireless) access-list 1 permit 192

ipv6 unicast-routing interface g0/0 ipv6 address 2001:db8:1:1::1/64 ipv6 enable : access-list 1 permit 192

network 10.1.1.0 0.0.0.3 area 0 network 192.168.2.0 0.0.0.255 area 1 : show ip ospf neighbor | show ip route ospf Lab 7 – IPv6 Addressing & Routing Configure IPv6 on interface :

From:
To:
Subject:
Body: